Neuron Signal Lamp

Beskrivelse

Neuron Signal Lamp er en brukervennlig enhet som gir tydelig visuell varsling når en regel på en Neuron-sensor slår inn. Lampen kan settes opp til å reagere på én enkelt regel eller på flere regler fra ulike sensorer. På den måten får ansatte på gulvet umiddelbare varsler uten å måtte åpne Neuron-appen eller andre tilkoblede systemer. Med trådløs tilkobling er Neuron Signal Lamp enkel å installere. Den leveres med støpsel for bruk i 240 V AC-uttak, men kan også kobles fast til en permanent 240 V AC-strømforsyning.

Driftsprinsipp

Neuron Signal Lamp leveres med en Neuron Actuator. Styreenheten kommuniserer trådløst med Neuron Gateway, som igjen kobler enheten til Neuron Cloud. I Neuron-appen kan Neuron Actuator enkelt knyttes til en varslingskanal. Denne kanalen defineres som mottaker av én eller flere regler fra Neuronsensorer. Når disse reglene slår inn, aktiveres signallampen.

Styreenheten kan settes i to driftsmoduser:

1) Når en regel slår inn, aktiveres lampen og forblir på til den manuelt nullstilles i Neuron-appen. Dette sikrer at personalet bekrefter varslingen før lampen slås av.
2) Når en regel slår inn, aktiveres lampen i en forhåndsdefinert tidsperiode og slås deretter automatisk av.

Funksjoner

Velg mellom to moduser: kontinuerlig lys eller tidsstyrt funksjon med justerbar aktiveringstid. Konfigureres i Neuron-appen.

Neuron Signal Lamp inneholder en Neuron Actuator (styringsenhet) som styrer lampen. Styringsenheten kobles enkelt til systemet via QR-koden på enheten, noe som sikrer umiddelbar og korrekt registrering i appen på telefon/PC/nettbrett.

Styringsenheten kommuniserer med nærmeste Neuron Gateway, som igjen kommuniserer med Neuron Cloud.

Neuron system benefits

Robust sensors
Suitable for rough environments
Wireless
Wireless sensor with integrated battery
Long lifetime
Typical 10 years battery life
Quick installation
Wireless, installed and operational in minutes
Collect and deliver data
Data delivery through API and app
Broad offering
More than 50 different sensor types available

Operational specification

Status light:*
Green – Normal state (Permanent light)
Red – Alarm state (Permanent light)

Report Frequency:
Reports status every 15 min.
Or immediately when triggered

Response Time:
Approx 5 sec

Operating voltage:
240VAC Max. 10W

Operating Environment:
Temperature: -40 – 75 ºC
Relative humidity: 0-80% (non-condensing)
Altitude < 2000m above sea level Pollution degree 3 Indoor use, not for wet locations Radio Frequency:
863-870 MHz

* Other configurations available on request. E.g. buzzer/siren

Physical specification

Mounting:
Electronic box: Wall mount brackets included
Lamp: Wall mount bracket included

Dimensions LxWxH:
Electronic box: 310x215x160mm
Lamp: 141x38mm 2 m cable

IP Grade:
Electronic box: IP66
Lamp: IP65

Regulatory

Certifications:
CE marking
UK CA
FCC
Industry Canada

Directives/Standard:
IEC 61010-1:2010
FCC Part 15C
RED 2014/53/EU Radio
Equipment Regulations 2017

Installation

Place elevated with distance to fixed objects

Keep antenna clear off the metallic surface

Neuron sensors are ready for use out of the box and will start logging data after registering the sensor in the app. Even though Neuron sensors deliver great range and long battery life, following some simple guidelines for mounting of the sensor and gateway can greatly improve signal coverage and lifetime of the sensor.

To ensure optimal antenna performance and signal strength, the sensor should be placed elevated with some distance to fixed objects. Keep in mind that RF-signals are greatly affected by close metallic surfaces.

For sensors with an external antenna, the antenna should be clear off the metallic surface.

For sensors operating in environments with greatly varying temperatures, care should be taken to avoid putting the sensor in unnecessary stress. Very high or low temperatures will affect the battery life and the signal strength of the sensor. While some sensors must be close to the source of heat or cold, other sensors have external probes which allow the sensor to be placed at a distance.

Fastening
The small, compact blue Neuron sensors are fitted with fastening holes for use with cable ties. The sensors are also delivered with double-sided tape that may be used for fastening of the sensors.

All the black Neuron sensors, like the Neuron IR380 and Neuron Vibration, are fitted with a strong magnet at the back for easy fastening. If there is no magnetic surface, then double-sided tape is a good solution.