Neuron Humidity

Funksjoner

Integrert batteri med lang levetid – opptil 10 år

Kontinuerlig måling og øyeblikkelig alarm

Justering av parametere som målefrekvens på forespørsel

Definer dine egne alarmnivåer i Neuron-appen

Motta varsler som push-varsler, e-post eller SMS

Koble enkelt sensoren til systemet med QR-koden på sensoren. Sikrer umiddelbar og nøyaktig registrering i appen på din telefon/PC/nettbrett

Sensoren overfører data til din nærliggende Neuron Gateway som deretter igjen kommuniserer med Neuron Cloud

Nøkkelpunkter

Måleområder:
0-100% RH, -40 – 85 °C

Målefrekvens:
Hvert 30. sek

Rapporteringsfrekvens:
Hvert 2. min. Eller umiddelbart etter måling dersom endringen overstiger grenseverdien

Forventet driftstid*:
Inntil 10 år

*Avhenger av målefrekvens, mengde umiddelbare dataoverføringer og omgivelsestemperatur

Neuron system benefits

Robust sensors
Suitable for rough environments
Wireless
Wireless sensor with integrated battery
Long lifetime
Typical 10 years battery life
Quick installation
Wireless, installed and operational in minutes
Collect and deliver data
Data delivery through API and app
Broad offering
More than 50 different sensor types available

Operational specification

Measuring Range:
0-100% RH
-40 – 85°C

Resolution:
0.1% RH and 0.1°C

Accuracy:
± 2% RH and ± 0.2°C

Measuring Frequency*:
Every 30 sec

Report frequency*:
Reports every 2 min. Or immediately if trigger for critical data transmission is reached, see below

Trigger for Critical Data Transmission*:
5% RH change in measurement

Operating Environment:
Ambient temperature: -40 – 85 °C
Relative humidity: 0-80% (non-condensing)
Altitude: < 2000m above sea level
Pollution degree: 3

IP Grade:
IP 21, indoor use.

Radio Frequency:
863-870 MHz / 902-928 MHz

Battery Type
Li-SOCl2, 3.6V

Expected Operating Time**:
Up to 10 years

* Adjustable on request
** Depends on measurement frequency, amount of critical data transmissions and ambient temperature

Physical specification

Materials:
POLYblend 65 FS

Dimensions LxWxH:
37x25x14mm

Regulatory

Certifications:
CE marking
UK CA
FCC
Industry Canada

Directives/Standard:
IEC 61010-1:2010
FCC Part 15C
RED 2014/53/EU Radio
Equipment Regulations 2017

Installation

Productsheet_GaugePressure_Page_3_Image_0001

Productsheet_GaugePressure_Page_3_Image_0002

Productsheet_GaugePressure_Page_3_Image_0003

Productsheet_GaugePressure_Page_3_Image_0004

Neuron sensors are ready for use out of the box and will start logging data after registering the sensor in the app. Even though Neuron sensors deliver great range and long battery life, following some simple guidelines for mounting of the sensor and gateway can greatly improve signal coverage and lifetime of the sensor.

To ensure optimal antenna performance and signal strength, the sensor should be placed elevated with some distance to fixed objects. Keep in mind that RF-signals are greatly affected by close metallic surfaces.

For sensors with an external antenna, the antenna should be clear off the metallic surface.

For sensors operating in environments with greatly varying temperatures, care should be taken to avoid putting the sensor in unnecessary stress. Very high or low temperatures will affect the battery life and the signal strength of the sensor. While some sensors must be close to the source of heat or cold, other sensors have external probes which allow the sensor to be placed at a distance.

Fastening
The small, compact blue Neuron sensors are fitted with fastening holes for use with cable ties. The sensors are also delivered with double-sided tape that may be used for fastening of the sensors.

All the black Neuron sensors, like the Neuron IR380 and Neuron Vibration, are fitted with a strong magnet at the back for easy fastening. If there is no magnetic surface, then double-sided tape is a good solution.