Neuron Hour Meter

Beskrivelse

Neuron Hour Meter teller medgått tid når den er koblet til 4-30VDC. Dette gjør den egnet for timetelling på for eksempel kjøretøy og maskiner for vedlikeholdsformål.

Det er enkelt å stille inn ulike alarmer i appen og varsler kan mottas som pushvarsling, e-post eller SMS. QR-kode på sensoren sørger for enkel og nøyaktig registrering i appen.

Funksjoner

Batteri med lang levetid – opptil 10 år

Kontinuerlig måling og øyeblikkelig alarm

Justering av parametere som målefrekvens på forespørsel

Definer dine egne alarmnivåer i Neuron-appen

Motta varsler som push-varsler, e-post eller SMS

Koble enkelt sensoren til systemet med QR-koden på sensoren. Sikrer umiddelbar og nøyaktig registrering i appen på din telefon/PC/nettbrett

Sensoren overfører data til din nærliggende Neuron Gateway som deretter igjen kommuniserer med Neuron Cloud

Neuron system benefits

Robust sensors
Suitable for rough environments
Wireless
Wireless sensor with integrated battery
Long lifetime
Typical 10 years battery life
Quick installation
Wireless, installed and operational in minutes
Collect and deliver data
Data delivery through API and app
Broad offering
More than 50 different sensor types available

Operational specification

Measuring range***:
Counts elapsed time, in hours, when voltage applied (4-30VDC)

Accuracy:
20 ppm @ 25 °C

Measuring Frequency*:
Every 10 sec

Report Frequency*:
Reports every 2 min

Trigger for Critical Data Transmission*:
20mV charge in measurement

Operating Environment:
Ambient temperature: -40 – 85 °C
Relative humidity: 0-100%
Altitude: < 2000m above sea level
Pollution degree: 4

IP Grade:
IP 67, wet conditions, indoor use

Radio Frequency:
863-870 MHz / 902-928 MHz

Battery Type:
Li-SOCl2, 3.6V

Expected Operating Time**:
Up to 10 years

* Adjustable on request
** Depends on measurement frequency, amount of critical data transmissions and ambient temperature
*** Applying a voltage over the inputs may permanently damage the device

Physical specification

Materials:
POLYblend 65 FS / TPU

Connection Type:
2 x 40 cm RADOX 155 0.25 mm²

Dimensions LxWxH:
37x23x14mm

Regulatory

Certifications:
CE marking
UK CA
FCC
Industry Canada

Directives/Standard:
IEC 61010-1:2010
FCC Part 15C
RED 2014/53/EU Radio
Equipment Regulations 2017

Installation

Place elevated with distance to fixed objects

Keep antenna clear off the metallic surface

Neuron sensors are ready for use out of the box and will start logging data after registering the sensor in the app. Even though Neuron sensors deliver great range and long battery life, following some simple guidelines for mounting of the sensor and gateway can greatly improve signal coverage and lifetime of the sensor.

To ensure optimal antenna performance and signal strength, the sensor should be placed elevated with some distance to fixed objects. Keep in mind that RF-signals are greatly affected by close metallic surfaces.

For sensors with an external antenna, the antenna should be clear off the metallic surface.

For sensors operating in environments with greatly varying temperatures, care should be taken to avoid putting the sensor in unnecessary stress. Very high or low temperatures will affect the battery life and the signal strength of the sensor. While some sensors must be close to the source of heat or cold, other sensors have external probes which allow the sensor to be placed at a distance..

Fastening
The small, compact blue Neuron sensors are fitted with fastening holes for use with cable ties. The sensors are also delivered with double-sided tape that may be used for fastening of the sensors.

All the black Neuron sensors, like the Neuron IR380 and Neuron Vibration, are fitted with a strong magnet at the back for easy fastening. If there is no magnetic surface, then double-sided tape is a good solution.